Mastervolt Combi master 24/3000-60 CZone 230V compatible inverter-charger combination
Mastervolt Combi master 24/3000-60 CZone 230V compatible inverter-charger combination
DISCRIPTION
DISCRIPTION
Device Specifications – Sine Wave Inverter / Charger (24V Model)
Sine Wave Inverter Specifications
|
Category |
Details |
|
Nominal DC Voltage |
24 V (20.4–32 V) |
|
Output Voltage |
230 V |
|
Output Frequency |
50/60 Hz (configurable) |
|
Output Waveform |
True sine |
|
Continuous Power @ 40 °C / 104 °F (cos φ 1) |
3000 VA / 2600 W |
|
Peak Power (30 sec) |
4500 VA / 3900 W |
|
Surge Power (5 sec) |
6000 VA / 5200 W |
|
Max. Efficiency |
93% |
|
Battery No-load Power Consumption |
30 W (on mode) / < 1 mA (off mode) |
|
Energy Saving Mode Consumption |
10 W |
|
Synchronise with Mains |
Yes |
Battery Charger Specifications
|
Category |
Details |
|
Input Voltage Range |
170–280 V |
|
Max. Input Current |
13 A (adjustable) |
|
Max. Charge Current @ 40 °C |
60 A at 28.5 V (configurable) |
|
Battery Temperature Sensor |
Yes, included |
|
Battery Voltage Sense |
Automatic compensation |
Transfer System Specifications
|
Category |
Details |
|
AC Input |
25 A (switched) |
|
AC Output |
38 A |
|
AC Input Fuse |
Yes |
|
Transfer Speed |
10 ms |
|
Transfer Voltage Range |
Wide: 90–280 V / Narrow: 170–280 V |
|
Transfer Frequency Range |
40–65 Hz |
General Specifications
|
Category |
Details |
|
Galvanic Isolation |
Yes |
|
Display/Read-out |
LED display |
|
Dimensions (HxWxD) |
448 x 284 x 155 mm / 17.6 x 11.2 x 6.1 in |
|
Weight |
9.3 kg / 20.5 lb |
|
Compliance |
CE, E-mark, AZ/NZS |
Technical Specifications
|
Category |
Details |
|
Charge Characteristic |
IUoUo, automatic / 3-step+ for flooded, Gel/AGM and MLI (configurable) |
|
Recommended Battery Capacity |
180–500 Ah (based on gel batteries) |
|
Ground Relay |
Yes, configurable via mechanical jumper |
|
Temperature Range (Ambient) |
-25 °C to 60 °C (derating > 40 °C) |
|
Cooling |
Vario fan |
|
Protection Degree |
IP23 (vertical mounting) |
|
Safety Class |
IEC Protection Class I |
|
Humidity Protection |
Conformal coating, max. 95% RH, non-condensing |
|
Protections |
Over-temperature, overload, short circuit, high/low battery voltage |
|
Power Assist |
Yes, supports AC input with battery power |
|
Power Sharing |
Yes, AC input fuse setting selectable |
|
MasterBus Compatible |
Yes |
|
CZone / NMEA 2000 Compatible |
Yes |
📥 Download
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Smarter Power. Safer Seas. Trusted Gear.
Protects Your System
Prevents starter battery drain by isolating house loads when the engine is off—ideal for dual battery setups.
Corrosion Protection
Blocks low-voltage DC currents that cause galvanic corrosion while maintaining full AC safety ground connection.
Clean Sine Wave Output
Provides a pure, clean sine wave to protect sensitive electronics and ensure optimal performance of onboard devices.
"I’ve ordered yacht cleaning kits, deck fittings, even rare replacement parts — all arrived quickly. but honestly, it’s hard to find this stuff anywhere else in the UAE."
"Wasn’t expecting much, but I was pleasantly surprised. The anchor I got was top quality. Prices are reasonable and delivery to my dock was smooth."
"As someone maintaining an older European boat . This site saved me hours of searching — and the team actually knew what I was asking for!"
